Three Flashing Xbox 360 Lights – The Right and Wrong Way to Fix Your Xbox 360

As with anything, there is a right way and a wrong way to do it. The same goes for the three flashing lights on Xbox 360. Believe it or not, there is a right and wrong way to fix your Xbox 360 console.

This article will discuss some common misconceptions when it comes to fixing your beloved game box.

first things
Before you do anything, you need to decide if you’re one of the people who’s interested in paying Microsoft to fix your broken console, or if you’d rather save money and fix it yourself.

If you decide to go with the Microsoft solution, a few things to know are:

o Microsoft usually covers the red ring of death if the console is under warranty.
o If your console is not covered under warranty, be prepared to pay high repair fees.
o Microsoft will keep your console for about 6 weeks.
o This fix is ​​not permanent and players often experience three flashing lights again after receiving their Xbox 360 back.

Now, if you’d rather learn how to fix your Xbox 360 yourself, you’ll find tons of information available online that will tell you how to do this or that. Long before you try anything, you need to know what works and what can RUIN your Xbox 360 console beyond repair.

the wrong way
2 things you never want to do is put your console in the freezer or oven. Beware of people actually telling you to do this. Extreme temperatures can crack and destroy computer parts faster than anything else.

I will even say that sometimes these crazy things will cause your Xbox 360 to stop flashing three red lights for a short period, but this is only temporary and if you continue to subject your machine to this kind of torture you will end up damaging it permanently.

The right direction
Now, if you want to fix your Xbox 360 the right way, you’ll need to learn how to open the console and reset the GPU. The reason you get three flashing lights is because the poor design doesn’t allow the console to ventilate properly.

The heat builds up and ends up causing the solder joints to crack and the connection to be lost. To solve it you will have to reset the clamp that holds the GPU with some type of separator so that it no longer causes this.