Arts Entertainments
How Does Polyurethane Contractors Raise Concrete?

How Does Polyurethane Contractors Raise Concrete?

How Does Polyurethane Contractors Raise Concrete?

There are many things to know about concrete mudjacking. First, it is the process of excavating an excavation site by excavating around it and pouring a temporary concrete batch deep into the ground below. Once the batch has been poured, workers can then move on to the next site to excavate with their truck, skid machine, or forklift. Usually, this is done in sections to allow for the best access for other workers. When finished, all excess concrete is removed, hauled away, and compacted back into the original excavation hole

Polyurethane foam liquid concrete raising compound is injected into the hole as a thick liquid that solidifies as a rigid mudjacking compound. This fluid will NOT shrink or lose volume even after hours of pumping into the holes. This product is even lighter than other mudjacking products, and only requires a few holes to install. Even better, the holes tend to be smaller making a nearly invisible repair!

Another common reason people call in pros for concrete repair is because a section of wall has taken on water and has sunk. This type of damage typically requires demolition of a wall and replacement of the concrete itself before the new wall is built. However, with polyurethane products this is not necessary. The material will still work when properly applied, and the holes will all be filled back to perfection.

mudjacking

Another common reason people call in pros for mudjacking comes when an area has been sunken by too much concrete. Even with polyurethane products, sunken areas are easily restored to their original shape. Rather than have the sunken concrete be replaced with a new slab, experts choose to move the area forward using hinged concrete supports.

Even a small amount of water can create large problems with slabs that have been exposed to water for a long time. Fortunately, professionals have an answer for this as well. The material used to fill in the holes created with polyurethane concrete raising is highly resistant to water. Once it has dried, the mudjacking professionals will simply replace the old polyurethane with a new, dry compound. Once this is done, the entire floor can be filled again with no problems at all.

One more common reason for calling in experts for concrete leveling and mudjacking services is because holes have been drilled into walls and floors. For instance, if a hole has been drilled into a garage door and concrete has sunk into the hole, this is often a very easy problem to remedy. Professionals will simply use polyurethane to level the hole, and remove the concrete completely. These services are very handy when it comes to repairing or replacing damaged floors and walls, and there are many other situations in which they may come in handy.

Leave a Reply

Your email address will not be published. Required fields are marked *